|
Sun, May 1, 11 at 15:53
| Hello, I have a Honda Harmony II lawnmower purch 9/8/98
Model HRT216SDA ser# MZCG-6042843JF eng # GJAE-1198254MY1 The problem is the drive belt keeps popping off when I engage the drive wheels. I have changed the belt with a Honda original part many times, I have tried adjusting the tension tighter and looser, and still the same results. It seems to happen more when the grass is long or damp but not always. Any suggestions? This is very frustrating! |
Follow-Up Postings:
|
| When you are able to engage the drive does the engine seem to be laboring or pulling too much? You could pop a belt if something is hanging and pulling the engine down. Assuming the belt is at the proper tension I would look for something out of line or bent. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.