Hello,
My neighbor has the Troy Bilt Chipper Vac similar to the one for sale here:
http://newyork.craigslist.org/fct/grd/4471142344.html
The Champion battery model 12N12A4A1 will not take a charge. Starting this with the pull cord is pretty difficult, I think because the fuel tank is about a foot below the carburetor. We attempted to jump start the chipper using the battery from his riding mower. Both were 12v batteries (we think). As we turned the key to the starting position we could hear the starter running, but the engine was not turning over. I removed the plastic cover from the starter and noticed that the starter gear was turning, but was not moving over to engage the engine gear. In fact it was moving in the opposite direction than it should have. It was actually moving away from the engine gear.
Our first thought was that we had connected the jumper cables incorrectly, but we had red+ to red, and black- to black.
We reversed the cables and tried again. This time the starter did not turn at all.
Thank you for sharing any advice or thoughts.
This post was edited by mustangm on Wed, May 21, 14 at 16:26
bill_kapaun
mustangmOriginal Author
Related Professionals
Manchester Landscape Contractors · Tempe Landscape Contractors · Bristol Landscape Contractors · Cupertino Landscape Contractors · Seven Hills Landscape Contractors · Southbury Landscape Contractors · Tehachapi Landscape Contractors · Woodbury Landscape Contractors · Northlake Landscape Contractors · Birmingham Carpenters · Escondido Carpenters · Foothill Ranch Carpenters · Margate Carpenters · Orland Park Carpenters · Round Rock Carpenters