Return to the Lawn Mowers Forum | Post a Follow-Up

 o
dow corning #709 sealant

Posted by red_hazard 6a (My Page) on
Mon, May 17, 10 at 17:23

To seal the two halves of the gear casing on my powered walk behind mowever, I keep seeing references to Dow Corning #709 sealant. However, I googled and cannot find it anywhere. Was it replaced by something newer? Thanks


Follow-Up Postings:

 o
RE: dow corning #709 sealant

You can use the Permatex RTV sealant available at NAPA and other places.

Here is a link that might be useful: Permatex 'Gasket Maker'


 o
RE: dow corning #709 sealant

Thanks. I'll give that a try.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here