|
Sat, May 15, 10 at 17:54
| I have a toro 20031 personal pace mower. The spring that lets the personal pace return is broke. Have new spring, but can't seem to figure out how it goes back on. Also have to replace the drive cable. Any help would be greatly appreciated.
Thank you!!! PS:I have the old spring off. |
Follow-Up Postings:
|
| It's not uncommon for them to break. I thought I had a picture, but don't. If nobody comes up with one, I'll post one tomorrow. I think I have one in the barn. As I remember, they can be very difficult to replace. |
|
| Thank you, I have the new spring on the arm but can't figure out how to attach it to the handle. Hate the idea of taking to dealer and spending 40.00 or so to get it fixed. |
|
| Here it is. Note that the right hand side of the spring inserts into the same hole as that piece of plastic. I remember it being a bear to fix.
|
|
| Thank you very much for the picture. Got the spring in okay. Now have to change the drive cable. Thanks again!!! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.