|
Wed, May 5, 10 at 18:17
| I have a 22 inch lawn mower with a 6.5 hp Murray engine. Last year, I decided I wanted to paint the thing and I snapped the right rear bolt that holds the motor down. I got my brother to start drilling it out and he decided to try and use an easy out on it but the easy out broke so I can't drill out the bolt anymore. Do you think it would be okay to run the thing with only 2 of the bolts holding the mower down?
I am also looking and getting a weedwacker, probably a four cycle Echo. My dad told me to get a used one because he was talking to a landscaper one day and that guy said that new weedwackers are difficult to start because of the emissions stuff they have on them. Is that true? Or is it just because the guy has to start it up multiple times a day due to going to different job sites. Any help is appreciated. Thanks. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.