No. Unless changing the crankshaft seems straight forward to you! Usually BBC issues are easily resolved. Post the model # and I can share what usually goes wrong.

Tom

Thanks for the offer the model sticker is gone I will try to post a few pictures.

I did remove the bottom and it seems straight forward, there is a small belt the small pulley must have rusted off, all I found was a few bits and piece of the small pulley. I did take pictures I will try and post Sorry no model number.

Sometimes the tag is behind the control panel. Any idea how old from the engine #s?

That was the 1st place I looked no sticker. Here are a few pictures. Thanks

http://img.photobucket.com/albums/v483/Rolm/ToroMowerBrakeBlade002.jpg

Here is another picture

http://img.photobucket.com/albums/v483/Rolm/ToroMowerBrakeBlade008-1.jpg

Thanks I did find the model by digging around on the Toro site It is model 20490 I need the small pulley and the associated nut and bolt. From the picture it looks like a 3 inch-pulley.

That and the belt will probably do ya...