|
Sun, May 27, 12 at 19:57
| When cleaning the carb, the float pin fell out and so did the float. I want to re-install the float correctly - not upside down. What side goes goes towords the top of the carb and what side goes towords the float bowl. Thanks all for some info. |
Follow-Up Postings:
|
| The needle also fell out. Which end of the needle goes where? Thanks again for the help. |
|
| It can really only go 1 way. The tip on the float valve goes into the chamber against the seat.The float will be close to parallel to the body of carb when the bowl is full of fuel. |
|
| My Toro 20016 SN 2204004861 has this Honda OHC 5.5 on it. The engine number on the Honda engine is GJAE 1516487 A1A. The carb number is BB62BDNA11. The controls from the mower has 3 wire controls leading to the carb. One small wire that - I think - connects to the small hole on the spindle on the right side(standing at the back of the mower) of the carb (opposite side from the black spindle) There are two other larger wires (one longer than the other) that I'm not sure where they go. On the black - left - side probably. There are two larger holes on the black spindle. With all numbers described above, if I was to replace the carb with a new one, any idea on what the part number would be? Thanks again very much. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.