|
Wed, May 18, 11 at 21:13
| Somebody please tell me why the engine makers don't thread the holes in the flywheel so a person could turn bolts or screws into them, to use a regular pulling tool?
Yesterday, i tried to use a gear puller to take off the flywheel of a "curb find" mower, but the lack of holes, or the lack of threaded holes, made me use the Chinese Hammer Trick! Works every time! RJ |
Follow-Up Postings:
|
| Costs maybe .25 per hole, time etc, multiply that by a few hundred thousand. You got a curb find and you want to complain about the mfgs? :) Buy a $4 threading tap. Walt Conner |
|
| Nah I would rather watch Rusty use the Chineese Hammer Trick lol ! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.