Return to the Lawn Mowers Forum | Post a Follow-Up

 o
Part Needed

Posted by vabear VA (My Page) on
Sat, Jun 28, 14 at 10:07

I need the float bowl screw (holds bowl to Carburetor) on a Troy Built TB 260 self propelled with a B&S 725EX engine at 190 CC )12000 Series),. Can anyone help?


Follow-Up Postings:

 o
RE: Part Needed

I'd go to the Briggs website and download the IPL for your specific engine to get the correct Part#.
Then, Google or your local OPE dealer?


 o
RE: Part Needed

Using coat hanger technology I was able to get the bolt (actually primary Jet) out from where it lodged itself in engine cooling fins, rebuilt Carb and all is well.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here