Return to the Lawn Mowers Forum | Post a Follow-Up

 o
What is uneven ground for a zero turn?

Posted by showet none (My Page) on
Mon, Jun 2, 14 at 13:00

I hear a lot of talk about zero turns not being good for uneven ground but no explanation of what uneven ground is. I have places where the ground is sloped next to my drive or in a couple of localized areas so I am trying to determine if this means if I buy a ZTM I would not be able to mow those areas and consequently add to my work by requiring me to mow those spots by other means. Can the ZTM not mow sloped areas, not mow them well, or does the user just need to mow them carefully? These spots are not hills, just a slope next to the drive for water drainage but the slope can be significant and my drive is 600 feet long.


Follow-Up Postings:

 o
RE: What is uneven ground for a zero turn?

Most of the talk is about the way the Z turns ride. most of the best selling models from, Dixie Chopper, Hustler, eXmark, John Deere, Husqvarna, Kubota etc etc have a solid frame design. Meaning that all four tires are mounted solid to the frame. Such designs can and will put a hurting on your back.. People who over paid for the Z turn they have will swear it is the best riding machine in the world. But not good for uneven ground. They wont tell you why.. Well the truth is the thing will beat you to death when you try to operate it at a speed that it is designed to be operated at.

Gravely has a Z260 line of mowers that have a floating front axle that pivots. They do not ride as rough as a solid frame mower.

Ferris Z-turns have 4 wheel independent suspension and are the smoothest riding mowers I have been on.


 o
RE: What is uneven ground for a zero turn?

Most of the talk is about the way the Z turns ride. most of the best selling models from, Dixie Chopper, Hustler, eXmark, John Deere, Husqvarna, Kubota etc etc have a solid frame design. Meaning that all four tires are mounted solid to the frame. Such designs can and will put a hurting on your back.. People who over paid for the Z turn they have will swear it is the best riding machine in the world. But not good for uneven ground. They wont tell you why.. Well the truth is the thing will beat you to death when you try to operate it at a speed that it is designed to be operated at.

Gravely has a Z260 line of mowers that have a floating front axle that pivots. They do not ride as rough as a solid frame mower.

Ferris Z-turns have 4 wheel independent suspension and are the smoothest riding mowers I have been on.


 o
RE: What is uneven ground for a zero turn?

It is difficult to explain without actually seeing your land. If i personally walked your property i could point out trouble areas...
Why it is important to seek and purchase from a local dealer and a recommended brand in your area. My dealer did a site visit and very generous but lives nearby...My farm entrance drive is compacted rock/clay...grass side, middle, side, with obvious tire track low points...and an incline. Not steep but not a comfortable mow.
I do it anyway but i also have a reliable bush hog i've had for years that takes care of these rough spots and trails i bush hog in the upper fields that are rough.

I was a bit hesitant to tackle a few rolling hills but take it up and around, then down slow...no problems after a few hours learning curve.


 o
RE: What is uneven ground for a zero turn?

Agree just have to slow down. rough ground not as noticeable on LT cause your going slower. I would like to have the Ferris Zs, maybe if I don't move it will be my next one?


 o
RE: What is uneven ground for a zero turn?

My Scag Tiger Cat does pretty well on uneven ground and the seat makes something a little rougher than a lawn comfortable. But I move faster than I ever did on a lawn tractor so a bunch of mole runs crossways at top speed is pretty bumpy. My neighbor just acquired a Scag Cheetah with a nice suspension seat that is smoother. But if I slow down to the speeds I used to run a lawn tractor the ride is as smooth or better. I like the staggered wheel arangement on my Tiger Cat when negotiating depressions or ruts and it does pretty doggone good on hills and gulleys too, much more so than I would have attempted on a tractor. I find I do eat more dust on my zero turn for some reason but then I seem to get that no matter what I'm running.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here