|
Mon, Jun 11, 12 at 16:04
| HI everyone,
Im in need of Help! I have an ATCO Imperial B17 Cylinder Lawnmower. I recently went to start it and the string ripped off in my hand, and rapped aroung the starter and bend/mangled up the plastic starter unit. Can anyone help me find a new one. I have looked around for about a week now (my grass is getting out of control) and cant find one anywhere!? the code on my engine is G221 73532 Are theese really this hard to buy? Please Help me Many Thanks Andy Clarke |
Follow-Up Postings:
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Mon, Jun 11, 12 at 19:36
| You pretty much have to determine the ENGINE brand & Model and go from there. |
|
- Posted by ggoyeneche New Jersey (My Page) on Tue, Jun 12, 12 at 9:15
| I'm pretty sure you have a Mitsubishi G221P vintage 1990 or so. It is a flat head (valve in block). Mitsubishi is pretty much non-existent in the US. Apparently this is also the case in UK. Some Mitsubishi engines were private labelled for Briggs & Stratton, so you might consult a B&S specialist. At least in the US, Mitsubishi's on-again off-again marketing is why they have so little market share and are not too well regarded, even though technically they make a competent engine. |
|
- Posted by andyclarke83 none (My Page) on Tue, Jun 12, 12 at 15:32
| Thank you for replying, I have been searching all day, and i think i've found something, I didnt even know it was a mitsubishi engine, but now i do i have found another ATCO model, that runs the same engine. http://www.jungle-busters.co.uk/Atco-Commodore-Recoil-/-Pull-Start-Ass y-Mitsubishi-Engine Im not 100% sure if its the same but it looks right. Thanks you for your help |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.