|
Mon, Jun 18, 12 at 21:25
| Can anybody help!! I've got a 14SB that stopped running. I checked and had no spark. Replaced coil and still no spark, replaced module and still have no spark. Replaced plug unhooked ground from coil. Still no spark. Is there another way this could be grounding out. I've tried everything I can think of including replacing the wire from coil to module. Air gap is correct. It's driving me nuts. Thanks Rick. |
Follow-Up Postings:
|
| Did you hit something and shear the flywheel key by chance? I think being out of time could cause this... |
|
- Posted by lawnandmower (My Page) on Wed, Jun 20, 12 at 2:40
| check the cable or check the flywheel my bing out of time |
|
- Posted by lawnmowerdan ne fla (My Page) on Thu, Jun 28, 12 at 21:45
| there are 2 diff coils for these. one for the engine that uses the externerl ing module and one for the engine with out the ing module. they do not interchange. make shure you have the correct coil. i had this issue and was using the wrong replacement coil-no fire. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.