Return to the Lawn Mowers Forum | Post a Follow-Up

 o
peerless trans on a murray

Posted by just.a.murray none (My Page) on
Wed, Jun 11, 14 at 23:12

hi i was wondering if someone could help me out, i have a murray rider and it has a peerless trans in it, i can go forward and turn to the left just fine, when i go to turn to the right it comes to a very slow crawl to almost stopping, and after a few mins it will pick back up speed again, until i turn to the right and it doesn't matter how long the tractor been running it still does it oh also it very slow when backing up any ideas please any help would be appreciated
Ed


Follow-Up Postings:

 o
RE: peerless trans on a murray

Can you load it on the back of your truck and trade it off? This is not going to turn out well.


 o
RE: peerless trans on a murray

if all you have to offer is smart a** answers i would prefer not to have them at all


 o
RE: peerless trans on a murray

Is this hydrostat (zero turn type tractor with the castors on the front?) or gear drive? The old peerless I had in my Craftsman was gear drive? I would jack it up and make sure the wheel axles are free turning. If gear drive transaxle they are easy to take out and disassemble. I would also check the brakes if they are on the side the wheel dragging? Have no clue if it's hydrostat model?
But, fluid change may help especially if it has filter??? again no clue on hydrostats.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here