|
Tue, Jul 27, 10 at 1:10
| Hi there. I cleaned the carb after disassembling it, put new gas line and spark plug, greased the shaft and fresh gas/oil mixture on the weed wacker. I adjusted the L and H on the carb to the proper settings. It starts up and runs fine but seems to loose cc's or rpm's when I put it to work in the finest grass. What may cause this to happen? |
Follow-Up Postings:
|
| Either your fuel filter is partially restricted or your high speed circuit is dirty . |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.