|
Tue, Jul 24, 12 at 1:10
| I was having problems with my John Deere walk behind, it would move forward, but would not roll back, so I had to remove the transmission to take a look.
It turned out that the bearings on one side had seized up requiring that I order a new adjuster, which took awhile, and then found out that my rivet gun was too small, so I used a bolt instead. Anyways, with the time that went by, now I cannot recall exactly how to reassemble it all and was wondering if there are any links to any images of an exploded diagram. Once I see the order of the parts I am certain I can get it right back together. |
Follow-Up Postings:
|
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.