Return to the Lawn Mowers Forum
| Post a Follow-Up
Honda Clutch/Drive cable installation
| | |
Posted by lb1kenobi (My Page) on Wed, Jul 13, 11 at 13:40
| I'm replacing all of the cables on my Honda HRT216SDA self single speed 21" lawnmower,it's been over a month since I took the old cables out and forgot how the drive cable hooks into the transmission. There are two slots where the plastic snap can go into off of the cable,plus two places where the wire can hook into. It's almost hooked up but not sure if nit is correct. I'll try to post a photo.
http://s915.photobucket.com/albums/ac357/streamlight/?action=view¤t=HondaHRT216SDA003.jpg
http://s915.photobucket.com/albums/ac357/streamlight/?action=view¤t=HondaHRT216SDA002.jpg |
Follow-Up Postings:
RE: Honda Clutch/Drive cable installation
| | |
| Be a lot easier to just take it to the place that sells them, and pay them to fix it. yer lawn will be as high as a grass-hoppers eye, if ya try to fix it yerself! BT,DT: Rusty J. |
RE: Honda Clutch/Drive cable installation
| | |
| Yeah, I finally got it fixed,at first it looked like a maze trying to hook up that cable but eventually figured it out. |
RE: Honda Clutch/Drive cable installation
| | |
| How did it hook on? I have the same problem with mine, its a HRT216TDA, but it looks like I'm missing a pin or something to connect it. The cable itself is looped on the end and the base it just a foot-like area with a hole, I'm so lost! haha |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
|
|
|
