|
Wed, Jul 11, 12 at 14:48
| I want to replace the carburetor on my Craftsman mower- model 917.377690 engine part #143006706. I would like to know the steps required to do so. I have checked out many videos on youtube. But, none have the carburetor that I have on this mower. The steps to remove the carb from the engine appear quite different than what I would assume mine to be by looking at the mower. After removing the air filter kit, the carburetor is across from the muffler rather than side-by-side as I am seeing in videos. Can someone help? Thanking you in advance. |
Follow-Up Postings:
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Wed, Jul 11, 12 at 18:00
| Does that carb have the plastic bowl? IF so, there's a relatively inexpensive "bowl kit" that is basically a plug & play carb rebuild. |
|
| I've seen one of these carbs one time only and it was on an Ariens. I believe it's plastic. http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts /All-Products-Parts/Model-143006706/0247/1503500/P8080198/00001?blt=06 &prst=0&shdMod=143006706 |
|
| Thank you both for your responses. I ordered a replacement kit. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.