|
Mon, Jul 16, 12 at 16:26
| I have a Craftsman 6.75 22" mower - self propelled, model 917.377690 with a Tecumseh engine. I bought a carburetor replacement kit. I am trying to refit the plastic bowl (kit) to the metal carburetor in the engine. I can't get it to snug up. It seems as if the main nozzle isn't fitting into the metel carburetor and the whole bowl assembly is pivoting slightly but not allowing a meeting of parts. I can't get the spring to attach because of this. Can you help? Thanking you in advance. |
Follow-Up Postings:
|
| Is all that is protruding above the gasket just the stem of the tube? Certain that the stem is going into the proper hole? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.