Return to the Lawn Mowers Forum | Post a Follow-Up

Tru Cut

Posted by tomg NC (My Page) on
Mon, Jul 16, 12 at 16:45

I have a 20 inch Tru Cut. The drive chain broke and i had it replaced. Since then, it cuts super short - and if i adjust the height, nothing happens or it gets worse. What could the problem be?

Follow-Up Postings:

RE: Tru Cut

Yer not doing the adjustment correctly!

RE: Tru Cut

  • Posted by tomg NC (My Page) on
    Mon, Jul 16, 12 at 22:50

Thanks Rusty, but i have had the mower for 6 years and know how to adjust the cutting height. Something else seems to be going on

RE: Tru Cut

Well, that's odd. I've repaired my drive chain several times without issue. I do disconnect the control rod to get to the chain but it should be obvious if it wasn't reconnected. Other than that, the drive chain has nothing to do with the height adjustment.

Believe me, I have two left hands with all thumbs when it comes to being a mechanic. If I can't screw it up I can't imagine how anyone else could.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here