|
Fri, Jul 23, 10 at 19:41
| I was wondering if there is any way to dissemble the the spindle assy on the mtd mower model 13bd604g401 part number 618-0565 or lacking that any way to get some grease into them there starting to get tight and no longer spin as well and I was hoping to repair/grease them before they fail so I don't have to spend 180 dollars to buy to new ones |
Follow-Up Postings:
|
| They can be rebuilt. You can drill and tap for a grease zerk as well. If you use a grease zerk I would remove the inner oil seals to allow the grease easy access to the bearing. Ebay has lots of the spindles you gave a part number for at far lower prices than you quoted. |
|
- Posted by xxx1angel3xxx 8 (My Page) on Sat, Jul 24, 10 at 21:51
| so how do you take them apart and rebuild would like to go ahead and replace the bearings and drill for the grease zerk that would be great how would you do it and is there a source for the bearings and a blow up diagram would be good to |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.