|
Mon, Jul 30, 12 at 19:48
| I was riding it and it stopped. Would not start. Put in new solenoid same thing. It will start by manually overriding the solenoid but stops right away. Tested start switch seemed ok. Found 2 safety switch and they seemed to have problem. Took them to a repair shop he said that wasn't the problem because it started. What to do? Thanks, Bruce |
Follow-Up Postings:
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Mon, Jul 30, 12 at 20:56
| Have you checked the fuse? When you say it won't start, does that mean it cranks, but won't run, or that it won't crank period? IF the carb has a fuel solenoid on it, that should click when the key is turned ON/OFF. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.