Return to the Lawn Mowers Forum
| Post a Follow-Up
LawnBoy Sens-a-Speed
| | |
Posted by
ralex none (
My Page) on
Mon, Jul 30, 12 at 20:01
| I replaced a transmission bracket on my LawnBoy model 10672 and first time use was perfect. Using second time after about 10 feet the right rear wheel totally locked. Will not go forward or backward. Any ideas would be much appreciated. Thx |
Follow-Up Postings:
RE: LawnBoy Sens-a-Speed
| | |
| That's a tough one w/o being there. If you pull the wheel, is everything in place? |
RE: LawnBoy Sens-a-Speed
| | |
| make sure the washer is in the dust cover properly, could have fell out when installed ,that washer stops the wheel bolt from overtighting. |
RE: LawnBoy Sens-a-Speed
| | |
| I couldn't find the model on the LB site - is it the type with the grease fitting on each rear adjuster/clutch housing, or the one without the clutch housings? |
RE: LawnBoy Sens-a-Speed
| | |
| thx for advice, I'm still stumped I will add that my transmission was replaced 18 mos ago. I brought it home and first time out was fine then wheel locked. I returned to repair shop and they mmade a quick change (2-3 min) without removing wheels. I wish I paid attention, it was as if a part on transmission was reversed and in installing new bracket I may have done the same. I have since removed wheels, greased everything and am now going to remove transmission. I was trying to save some cash but frustration may not be worth it. |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in.
If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.
