Return to the Lawn Mowers Forum | Post a Follow-Up

 o
hrr216vxa

Posted by boydanny none (My Page) on
Fri, Jul 1, 11 at 21:29

I replaced carberator today and put everything back together, tried the idle screw, mower will not idle on low, and will only stay on when I put the handle towards choke, any ideas out there on what to try next? it is not surging as much as before


Follow-Up Postings:

 o
RE: hrr216vxa

Do you have a good fuel flow from the tank? These mowers vent through the threads of the fuel cap. When checking flow, do it w/ the cap on vs off. I assume the fuel is fresh and the tank and lines were flushed? Any questions on the gasket placement or that the insulator may have gotten cracked? A few bursts of carb spray around these areas whilst it is running will tell you alot.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.