before you buy a new or used coil, try this 1st, pre-heat your oven to 200 degrees and bake the coil for 20 minutes, let is cool and re-install. I did this on my lawnboy coil and it came back to life. Give it a try nothing to loose.

I will try that first thanks for the reply

There is currently one on Ebay. Starting price appears fair.

Here is a link that might be useful: Suzuki Ignition Module

Thanks alot ggoyeneche its a very fair price!! I will have to keep an eye on it!!!

I tried the coil in the oven trick the mower started the second pull!!!!thanks guys my next thing on the list is the drive doesnt seem to work the belt doesnt spin any ideas???

Hey Give the oven trick a bit more play, This should be the 1st step before replacing coils.

on the three leg stater, remove the coil assembly, and install a tescumeh HEI coil. may have to file the leg abit for the coil to slip on. works just fine. most shops will have used coils at nice price.

One: Fzb voiced the advice i was about to offer , upgrade to a better component . Also should the unit fail again after your baking solution , check all area Dealer's Mechanics (on the side) most of them do work on the side at Home and Hord numerous electrical components for emerg. situations. I have picked up numerous Coils Ignition Modules etc. from Dealer Mechanics or the Dealership themselves for 1/2 Price. Actually had a few offer the part free from their junk pile since I was a regular customer lol . As for the Belt Drive have not worked on any only Craftsman Models two pulleys one belt , if the crank turned so did the drive belt with the Bail Switch Engaged lol .