|
Fri, Aug 31, 12 at 10:16
| I have a Briggs and Stratton push lawn mower. Model 11a-584e765 47266. My problem is the mower starts fine but then it idles high then low back and forth. I already replaced the air foam filter and added new gas. Any suggestions ???? |
Follow-Up Postings:
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Fri, Aug 31, 12 at 10:57
| I'd suggest looking at the model# again and posting the correct one. You've missed/transposed or?? some digits. With the correct number, we can determine which carb you have. How does it operate at igh speed under load? |
|
| �Bolens 11A-584E765 (2005) Push Walk-Behind Mower The engine goes high throttle then goes back down. Up and down |
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Fri, Aug 31, 12 at 11:56
| Need the ENGINE #'s http://www.outdoordistributors.com/Briggs_And_Stratton/briggsmodelid.h tml Possibly it's a Briggs- IF SO- Replace part 394 on page 4/10 IF this is the correct engine, the entire carb can be found here amongst MANY places- Just Google Briggs 699660 |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.