|
Sat, Aug 14, 10 at 10:19
| Our older Honda HRT216SDA throws the drive belt whenever the drive is engaged and there is a load on the drive wheels. It has a new belt, cable and clutch drive handle. Had it serviced by a Honda repair center and they adjusted it and declared it working properly. Got it home and it immediately threw the belt again. Works fine if I lift the drive wheels or get it rolling before engaging the drive mechanism. Any thoughts on a fix or adjustment before I take the trouble to take it back to the repair place? |
Follow-Up Postings:
|
| Back it should go. these don't really have a habit of doing that- looks like something was overlooked. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.