Return to the Lawn Mowers Forum | Post a Follow-Up

 o
pto on swisher will not engage

Posted by ksuwildcats kansas (My Page) on
Fri, Aug 9, 13 at 19:15

I have a 2/3 year old swisher zero turn mower model zt2452a. I was cutting grass 2 days ago and the grass was high and wet. The blades started to bog down and the blades stop turning. Now the pto will not turn on . There is a very poor schematic in owners manual That I cant make out. I looked on the mower and found a 30 amp fuse and tested it and its fine.Any thoughts on what to check next ? Thanks Roger


Follow-Up Postings:

 o
RE: pto on swisher will not engage

Going to have to check for voltage both going into and out of the fuse. Check for voltage at the clutch.

BG


 o
RE: pto on swisher will not engage

This may not be your brand clutch, but the trouble shooting should be similar-

http://www.warnernet.com/pdf/819-0458_P-1097-6.pdf


 o
RE: pto on swisher will not engage

Thanks for the help. What i did today was go out and turn the pto switch on and off a few times and it starting working again. Im thinking the switch might be on its way out. I have only had this mower about 3 years and it sits out side year around , but get covered in winter. Thanks again BG and Bill


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Lawn Mowers Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here