Return to the Lawn Mowers Forum
| Post a Follow-Up
Honda HRM install new adjuster arm
| | |
Posted by
KenHRMHonda PA (
My Page) on
Tue, Aug 21, 12 at 22:15
| I hope somebody can help. My HRM215 SXA's left wheel broke off. I have bought a new part 42940-VE2-405. I have removed all of the existing parts from mower but the removal of the adjuster arm is only slightly budging. I do not see any bolts holding it into place but before I force it off, I would like to check to see if I am missing something. This should cover the last part of the removal process before I can install the new part.
Any help would be gratefully appreciated. |
Follow-Up Postings:
RE: Honda HRM install new adjuster arm
| | |
| You need to remove the inside circlip. You will need a pair of snap ring pliers. The clip is on the inside of the body not the outside. You will need to grease the new part or you will have drag when you pull it backwards. |
RE: Honda HRM install new adjuster arm
| | |
| Thank you. I will try that. |
RE: Honda HRM install new adjuster arm
| | |
| Well I got the inside circlip off. Uninstalled the broken assembly and began installing the new one. I am having a hard time putting the inside circlip back on the new piece. In order for me to see the grove that the clip goes into, I am having to place clamps on the sides as the tension on the adjuster arm pulls the shaft outward away from the side of the deck. I am still trying to resolve this. Any suggestions? |
RE: Honda HRM install new adjuster arm
| | |
| A long enough woodworking bar/ pipe type clamp will allow you to hold both sides inward so you can get the clip snapped in. |
RE: Honda HRM install new adjuster arm
| | |
| Thanks, I got the clip on using 2 clamps. I was hoping there was an easier way. I will assemble the remainder within the next few days. |
RE: Honda HRM install new adjuster arm
| | |
| I have now re-assembled the wheel and adjuster arm. I test ran the mower and that went ok. I plan to mow our lawn with it on Sunday (3 days). Thanks very much for your help!! |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in.
If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.
