|
Sun, Sep 4, 11 at 18:28
| i took the pan off because the gasket blew out when i did the cam gear fell out.where do i find instruction on doing this.it's a cub cadet #1p70fua chinese motor |
Follow-Up Postings:
|
| These have a dot on both the cam and crank gears. Align them and the valve timing is on. |
|
- Posted by bigdaddy1974 none (My Page) on Sun, Sep 4, 11 at 22:00
| thank you so much for your help! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.