|
Thu, Oct 7, 10 at 10:21
| I have the repair manual that says to align the crankshaft/camshaft using the marks on each gear. The crankshaft mark has been worn off. Anyway to line them up using the keys in the crankshaft with some kind of rotation angle on the shaft? |
Follow-Up Postings:
|
| I believe the mark would be at TDC- which may also align w/ the keyaway in the bottom of the crank. It isn't necessarily a dot on the crank gear either- rather on the cast part. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.