|
Thu, Oct 13, 11 at 10:32
| I'm attempting to remove the engine on a Honda HR215 Masters Series 21" mower , while the engine is still on the deck, I'd like to remove the BBC.
So far I got the blade and blade holder assembly off but the drive disc is still attached the the crankshaft. I have attached a gear puller to the drive disc but before I start cranking on the gear puller, need to know if that is the correct removal method. Any help appreciated,below is a picture link: http://s915.photobucket.com/albums/ac357/streamlight/?action=view&curr ent=HondaHR215BBC002.jpg http://s915.photobucket.com/albums/ac357/streamlight/?action=view&curr ent=HondaHR215BBC001.jpg |
Follow-Up Postings:
|
| Forget about my earlier post, I done got it fixed. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.