|
Wed, Oct 13, 10 at 10:44
| I have a Briggs 13.5 HP I/C with a Walbro carb.
Model: 28r707 Type: 0140-01 Code: 968524ZA I took the carb apart and gave it a good cleaning. Does any know the initial settings for the pilot-jet and idle mixture screws. Thx |
Follow-Up Postings:
|
| Typically such needle valves will start at 1.5 turns out. Be very gentle when bottoming the needle to start the count. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.