Honda HR215SX 1/2/3 speed dosen't work/lock

Blogs

Garden Voices

Forums

Garden Forums Home Forums Nature Forums

Photo Galleries

Garden Galleries Home Galleries

Ask The Experts

Tools & Directories

Organization Directory Events Calendar Hortiplex Glossary Zone Finder Garden Bazaar

Return to the Lawn Mowers Forum | Post a Follow-Up

clip this post email this post what is this?
see most clipped and recent clippings

Posted by mvron (My Page) on

Tue, Oct 27, 09 at 13:51

The self-propelled works. The speed shift lever moves from front to back 1-3 without stopping for each of the speeds. The speed remains constant regardless of where the lever stops. Ideas on what to look for.

Follow-Up Postings:

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by tomplum 7-8 (My Page) on
Tue, Oct 27, 09 at 17:00

You will have to determine first if the cable is actuating the transmission.

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by mvron (My Page) on
Wed, Oct 28, 09 at 14:56

It looks like the cable is working. It activates a lever on the transmission that pushes a pin back and forth into the trans. I don't know how far the pin goes-or is supposed to go- into the trans. The length of the pin travel probably depends on where the "1/2/3" lever is. What holds the "1/2/3" lever in place on the handle? Could it be just a cable adjustment?

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by tomplum 7-8 (My Page) on
Wed, Oct 28, 09 at 19:53

It has been a while since i opened these up. I had two in a row that had shift fork problems that cause the problem. If you can't change the speed by moving the trans lever then it is in the box. I'll drop a link below so you can look it up and see what happens inside.

Here is a link that might be useful: Honda parts

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by mvron (My Page) on
Sun, Nov 1, 09 at 21:46

It looks like on the Honda Throttle lever parts list that the handle end of the speed control cable attaches directly to the 1/2/3 lever on the handle. This mower has a spring linking the upper end of the speed control cable to the 1/2/3 speed control lever on the handle. I think this is a cluge job. Ideas?

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by tomplum 7-8 (My Page) on
Sun, Nov 1, 09 at 23:16

I'm not sure what you are asking. If you've determined the trans needs to come out, you are correct- it is a challenging repair.

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by mvron (My Page) on
Mon, Nov 2, 09 at 12:18

Right now I'm wanting to know if the speed control cable is supposed to attach directly to the speed control lever on the handle and not the phoney spring that is currently connecting the speed control cable to the speed control lever on the handle.

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by tomplum 7-8 (My Page) on
Tue, Nov 3, 09 at 0:18

The IPL doesn't show a spring on either end of the gear speed control.I'm having a hard time wrapping my head around that. I don't have one to look at either. By your description, you are watching the cable move the lever on the transmission. Confirm that. If it is, and there is no speed variance- I'm thinking its in the box. Fork, shift keys etc.

RE: Honda HR215SX 1/2/3 speed dosen't work/lock

clip this post email this post what is this?
see most clipped and recent clippings

Posted by mvron (My Page) on
Tue, Nov 3, 09 at 12:52

That's true. I can see the lever move on the transmission. Because the spring - kulge i'm sure - distorts the length of travel that activates the transmission lever/pin that slides in and out of the transmission. Attaching the handle end of the speed control cable to the speed control lever - minus the spring using a bolt or anything else thats hard fixed - may change the transmission lever/pin activation travel distance into the transmission thus activating the different gears in the transmission.

Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

If you are a member, please log in.

If you aren't yet a member, join now!

Return to the Lawn Mowers Forum

Click here to learn more about in-text links on this page.

		Join \| Garden Forums \| Home Forums \| Exchanges & Trading \| Member Pages \| Contact Us © 2006 iVillage Inc. All Rights Reserved. Terms of Service \| Privacy Policy \| Policies FAQ \| Advertising
		iVillage Home & Garden Network