Return to the Lawn Mowers Forum
| Post a Follow-Up
Toro 2 cycle in trash
| | |
Posted by
iliketacos (
My Page) on
Sat, Oct 2, 10 at 17:35
| I found a Toro model# 20684 in the trash today. It starts and the self propelled works in it but the blade does not engage. When I pull the lever it makes a grinding noise then takes off. Anyone have any idea what the problem could be? Is this somthing worth fixing or should I put it back on the curb? |
Follow-Up Postings:
RE: Toro 2 cycle in trash
| | |
| Those 2-cycle models were good to use. I'd investigate and find out what is wrong with it. Might besomething rubbing in the working parts. Usually too good to junk! |
RE: Toro 2 cycle in trash
| | |
| BBC idler pulley likely. Worth tearing into for sure! |
RE: Toro 2 cycle in trash
| | |
| My 20684 was a freebie too. I used it for a couple of seasons before I got a sitdown. |
RE: Toro 2 cycle in trash
| | |
| It could be worth fixing if you need a lawn mower. Otherwise why bother. |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in.
If you aren't yet a member, join now!
Return to the Lawn Mowers Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.
