Shop Products
Houzz Logo Print
hurricane67_gw

Help with a briggs 31p777-0348-e1

hurricane67
12 years ago

engine won't start. has new alt, voltage regulater, head gasket(torqued to specs), camshaft, crankcase gasket, spark plug, compression is 120 lbs, coil is gapped at .030, valves were adjusted at .004 turning the flywheel counter clockwise 1/4 inch after dtc, clean carb, fresh gas, the ehhaust heats up when cranking the engine over, but will not start. also has new battery so cranking is not an issue. I don't think I missed anything, but I can't seem to get it started. Can anyone help me out? E-mail me at hurricane67@yahoo.com thankx....Jim

Comment (1)