Hi All:
I am a newby!!!
I have aquired a 1988 Wheelhorse 312-8 with the Kohler Magnum 12 hp engine.
I got it running
The unit will only idle.
I can see one part of the throttle move when the throttle is raised or lowered at the dash control.
The second bar does not move.
the second bar goes to the carb.
I am able to rev the motor up manually at the carb.
I suspect that the previous owner messed up the springs or something.
I am seeking a diagram or description of how these two linkages interact or how they are supposed to work.
Thank you in advance and I hope that one of you out there can help me out.
I am trying to get this unit ready for snow, I remove the snow for 5 of my neighbors, all retired or widowed or both.
The walk behind snowblower requires too much time and energy.
Thanks again.
baymee
baymee
Related Professionals
West Milford Landscape Architects & Landscape Designers · Edmond Landscape Architects & Landscape Designers · Lowell Landscape Architects & Landscape Designers · Seabrook Landscape Architects & Landscape Designers · Goodyear Landscape Contractors · Berkeley Heights Landscape Contractors · Bound Brook Landscape Contractors · East Haven Landscape Contractors · La Verne Landscape Contractors · Reedley Landscape Contractors · Saint Paul Landscape Contractors · Thornton Landscape Contractors · Four Corners Landscape Contractors · Tigard Carpenters · Weston Carpenters