|
Wed, Jun 20, 07 at 9:21
| I am not sure I am in the right place, but I'll give it a try.
I am building a pond/waterfall. The purpose is to have a large waterfall. The pond will be clear water. No fish or plants. It's really a large fountain. The waterfall will be 7 feet wide annd have three drops. The pond will hold about 800 gallons. (8 ft x 6 ft x 2 ft) By my calculations, I will need a pump in the 10,000 GPH range. HELP:
What would be more efficient? Brands? Filters? Any comments are appreciated. I am adding a drawing of the fountain.
|
Follow-Up Postings:
|
| Your original post was over in the Discussions area, Panteradon. This is the off-topic area, so not as many people will see it. :) Brenda |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Ponds & Aquatic Plants Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.