|
| My pvc liner has a dime-sized hole. How do I patch it? Thanks! |
Follow-Up Postings:
|
- Posted by h20gardener (My Page) on Wed, Mar 31, 10 at 17:01
| I've used PLUMBER'S GOOP with success. |
|
- Posted by maktargenie MI (My Page) on Fri, Apr 2, 10 at 17:18
| I tink Beckett makes a patch kit; I've seen it in the past at home depot stores for 10-12$ bucks. I'm not a huge fan of patch kits though. My preferred method is use the small container of liquid epdm. I use it as a paste to attach a small piece of liner over the tear and then cover over the entire piece again with liquid epdm and let it cure for a couple days. I've used this method several times in various places and never had a return leak. Used to be only available in the 1 gallon container but last summer I found it online a lot cheaper in the smaller size. Of course, I'm sure people have used patch kits with good succes as well -- this is just my preferred method. |
|
| we have a pvc cement that will work, do you have any of the liner that you could cut or left over from install? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Ponds & Aquatic Plants Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.