Return to the Ponds & Aquatic Plants Forum | Post a Follow-Up

Gluing liner to a preformed

Posted by dbuys 5 (My Page) on
Thu, Mar 4, 10 at 11:52

I'm trying to find the best material to use that would securely attach pondliner to a preformed pond. Any ideas out there?

Follow-Up Postings:

RE: Gluing liner to a preformed

Why???????? If you have a leak its better to replace the preform with liner anyways. IF your adding something to the preform then you dont need to seam it to the preform as long as the liner is above the preform and running into it.


RE: Gluing liner to a preformed

I have a preformed as a top pond kind of like a plant bog. It's banana shaped and I have two streams running from the notches that I cut out of the preformed. The streams are made of the liner that needs to be attached to the preformed. I hope that makes it clear as to why!!

RE: Gluing liner to a preformed

Oh gotcha... Well there are a couple of ways, one would be to use seam tape that you use to repair pond liners. Just make sure you clean the sides of the preform. Another way believe it or not is to use gorrila glue and gorilla tape. Wet the liner first and then add a good amount of glue on the wet surface and then attach it to the preform and use the gorrilla tape to hold it in place. Make sure you run a roller over to make sure of good contact. The glue will expand and secure it to the preform. The glue actually preferrs to get wet to work better. I use it for years in all my installs for when i add a biofall and need to attach liner to it. Hope this helps!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Ponds & Aquatic Plants Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here