|
Sat, Apr 3, 10 at 18:46
| Does anyone have information where the stainless steel spillway for the 100 gallon Rubber Maid stock tank can be purchased? I saw the outside filter and water fall made from the Rubber Maid stock tank at this web site: http://www.koiclay.com/diy/pg1.htm But can't find a place to get the spillway. I tried contacting them at the web site but got a message that the email would not go through. Does anyone have any ideas for anything else that would work for the spillway? Thanks! |
Follow-Up Postings:
|
| I don't know if this place still makes them, I found this link elsewhere on that site. I just have a 1 1/2" pvc pipe instead of a weir, but you won't get a 'sheet' of water effect with it. Perhaps some other DIY's will chime in. Good Luck, S |
Here is a link that might be useful: SS Spillway
|
| Thanks for the info. I think I'll check with them on getting one. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Ponds & Aquatic Plants Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.