|
Wed, May 25, 11 at 16:48
| a 3/4" barb on a waterfall box using ID tubing? I am stumped! |
Follow-Up Postings:
|
| If you're not familiar with fittings, go to the plumbing section of any big box or hardware store and ask your question. Assuming the person helping you knows up from down, (BIG assumption) you should be outta there in a couple minutes, problem solved. In a pinch, *ahem* I have been known to use short lengths of tubing as temporary adapters but it must be a tight fit. And even then, I wouldn't leave my pond unattended for any length of time unless the connection was submerged. (disclaimer: definitely NOT something I would recommend if dealing with high pressure) Living 40 miles from the nearest big box store can be a pain at times...and necessity is the mother of invention as they say.. ~digger |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Ponds & Aquatic Plants Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.