|
Fri, Oct 1, 10 at 10:09
| I currently have a 100 gallon stock tank, just recently purchased and a bunch of left over brick from when our house was built. We have a patio made out of some kind of concrete with stamps. It is on a slight downhill slope for water run-off. I would like to use the brick as a surround to the stock tank, for above ground use on the patio, meeting up with the side of the house. I have never laid brick and have no idea how this is done. I have seen several ideas on here for surrounds, but how to accomplish this?? Does anyone out there have an easy way to make this happen, besides hiring it done? Thank you in advance. |
Follow-Up Postings:
|
| Just stack them and put a rod/pole down thru the holes for now.Add dirt in the holes and add pretty hanging plants for later. That way you can move it later if you want to. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Ponds & Aquatic Plants Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.