Return to the Roses Forum | Post a Follow-Up

 o
Bug Larva in Rose Cuttings

Posted by TNY78 7a-East TN (My Page) on
Tue, Jun 26, 12 at 22:02

I have some rose cuttings that I've been trying to root. Some are from my own garden, and some are from a good sized exchange I did recently. They are all about 3-4 weeks into the rooting process. I am rooting half in my usual seeding soil/perlite mix in clear Solo cups, and the other half I am trying to root in 1g pots of playsand; all cuttings were scarred and dipped in Clonex Gel rooting compound. They are all inside my mini-greenhouse with the door flap rolled up. Of the ones that are failing, I noticed that the areas where I scarred them have little tiny larva crawling in the cuts. Is this normal? Can I spray my cuttings with Bayer for Roses Insect Killer, or are they too fragile at this state? Any suggestions are appreciated :)

Thanks, Tammy


Follow-Up Postings:

 o
RE: Bug Larva in Rose Cuttings

now are you sure these cuttings are not smuggled from Paris?...maybe you told us only half the story before...maybe these are the ones u got away with?


 o
RE: Bug Larva in Rose Cuttings

I had little white mites that was on cuttings I asked what they were here on GW but no answer so I just ended up soaking them in soapy water. I don't know if it helped the cuttings died a few weeks later..

IMAG0258


 o
RE: Bug Larva in Rose Cuttings

HAHA!! Thats so funny!


 o
RE: Bug Larva in Rose Cuttings

  • Posted by TNY78 7a-East TN (My Page) on
    Wed, Jun 27, 12 at 12:31

LOL...I promise these were legally attained :)


 o
RE: Bug Larva in Rose Cuttings

No, bugs aren't normal. Some potting soil contains fungus gnat larvae and the gnats pupate (if that isn't the right word, would a biology major please correct me?) when the soil remains damp for a week or two. Then you've got gnats flying around inside your house. With pure sand, you should not have gnats so I dunno what your insects are.

the scarred portion of the cutting should be below soil level so I don't understand how you can see bugs in it. If you're pulling up the cuttings to check on them, that's a really bad idea. You need to stick a cutting and ignore it until new growth starts.


 o
RE: Bug Larva in Rose Cuttings

  • Posted by TNY78 7a-East TN (My Page) on
    Wed, Jun 27, 12 at 13:55

Yes, those look like the same thing Jessica.

Cecily, only half of the cuttings are in sand; the other half are in soil/perlite. I do have the scars below soil level, but these were the ones that were obviously not going to root, so I was inspecting them after pulling to disgard.


 o
RE: Bug Larva in Rose Cuttings

They could be mites, are they fast moving? The best way to get rid of mites is to submerge the pot for a few minutes and drown them. That would work fine with the cuttings in sand (which is how I root mine) but would oversaturate the soil ones.


 o
RE: Bug Larva in Rose Cuttings

  • Posted by TNY78 7a-East TN (My Page) on
    Thu, Jun 28, 12 at 16:31

Thanks tbred...I think the ones that got the mites are already pulled. I guess for next time I can try soaking them or hopefully find a way to prevent them before they take over.

Tammy


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Roses Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.