|
Sun, Jan 24, 10 at 14:24
Follow-Up Postings:
|
| Oh yeah, not only that, but they make mesh bottom 1020 flats, too! Check out the link below to see what I'm talking about; the nice thing about the mesh flats is you can pull them out and set them up in front of a fan and get real good circulation all the way around. Much easier than taking each little peat pot in and out every time, isn't it?? :) |
Here is a link that might be useful: Example of mesh flat
|
- Posted by grow-anything (My Page) on Sun, Jan 24, 10 at 16:40
| Yeah, I use some of the mesh flats too. I saved them from buying plants here and there. I have all kinds of seed starting flats laying around. |
|
- Posted by keriann_lakegeneva (My Page) on Sun, Feb 7, 10 at 13:25
| I just leave one compartment open in my tray and water through it, as to not disturb the other seedlings. I use a variety of plastic trays from a 90+ tray down to a 18 tray with a 1020 (with no holes) trays underneath. This works quite well. Quick an easy :) |
|
- Posted by californian 10 (My Page) on Sun, Feb 7, 10 at 13:33
| The directions that come with Pro-Mix BX with Biofungicide seed starting mix says don't bottom water, only top water. Something about causing uneven distribution of nutrients if you bottom water. |
|
- Posted by grow-anything (My Page) on Sun, Feb 7, 10 at 16:55
| I don't use any seed starting mix that contains fungicide. I do mix fungicide with water and spray that on the top of the soil and the plants themselves after they get started. |
|
- Posted by keriann_lakegeneva (My Page) on Mon, Feb 8, 10 at 21:10
| I see you are using those Jiffy peat pot trays. How do you like them? It looks like you have a lot of water in the bottom (but the stick keeps it from laying in it?). Have you found it hard to regulate water? Are they sturdy? Keriann~ |
|
- Posted by grow-anything (My Page) on Tue, Feb 9, 10 at 10:44
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Growing from Seed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.


