Return to the Shrubs Forum | Post a Follow-Up

 o
Myrica californica or waxleaf privet for screening?

Posted by umema none (My Page) on
Fri, Sep 28, 12 at 15:37

Hi I live in Zone 10b, southern California. I need to built a screening wall between my neighbor and our entrance. We have only 2ft from cements to the neighbor wall. I need to cover around 32ft length (32Ftx2ft). I would like this wall to be 7ft tall. I researched and talked to some local nurseries they told me that Myrica californica (Pacifica Wax Myrtle) for a 3 ft length tree to get to 6-7 ft it would take 4 month and it is the fast growing (5 ft per year) the other one is Waxleaf privet, for 3 ft tree to get t o 6 ft they said it takes 1.5 year. I need to cover the exposed area quickly. Also how far should I plant them apart?
>Your opinion will be appreciated.
>Thanks,


Follow-Up Postings:

 o
RE: Myrica californica or waxleaf privet for screening?

The myrica is a decent sized shrub - can produce a 10-12' spread so will become a huge chore to keep pruned to a 2' width. And I'm not at all sure will look very attractive pruned that severely. Same with the privet - not as wide as the wax myrtle for sure but too wide for the space available without very frequent trimming to keep the walkway walkable.

This is a situation that cries out for bamboo - evergreen, fast growing with a range of available heights and able to maintain a very narrow profile. Depending on the specifics of the planting conditions you might not be very limited to species but any of the clumping bamboos will work beautifully and without problems.

btw, your local nurseries are feeding you a line. No shrub will grow as fast as they describe immediately after planting, ideal SoCal climate or not. They need time to establish and develop a root system and that doesn't happen immediately. You could expect 3' tall shrubs to hit 6-7 feet in a couple of years, not a couple of months.


 o
RE: Myrica californica or waxleaf privet for screening?

Thanks for reply. Does the bamboo runs high and everywhere? How about Italian Cyprus?


 o
RE: Myrica californica or waxleaf privet for screening?

Concur on the bamboo, and the Myrica will get WAY too wide for that spot. You can shear it but not down to 2' width - pretty soon all you'll have are bare trunks and stubs. And gardengal was suggesting clumping bamboo, which is not invasive. Italian Cypress would work functionally - you'll have to check if it grows there happily. It needs full sun to look its best. Very different look from bamboo, so you'll have to decide on the effect you prefer.


 o
RE: Myrica californica or waxleaf privet for screening?

Thanks for suggestions. I will go to Green Thumb today and try to see what is out there and find out more. I will post my findings with photos of my entrance.
Thanks


 o
RE: Myrica californica or waxleaf privet for screening?

Great! The photos will help. Good luck!


 o
RE: Myrica californica or waxleaf privet for screening?

  • Posted by bboy USDA 8 Sunset 5 WA (My Page) on
    Sat, Sep 29, 12 at 13:34

At the Darlingtonia Wayside near Florence there are wild Pacific wax myrtle that are big and arborescent enough to be shade trees, with substantial single trunks and elevated crowns. A planted one at Seattle Pacific University may be as big or even bigger than these, it measured 30'
x 3' 4 1/2" x 30' in 2005 (Height x trunk circumference x average crown spread).

On the other hand, specimens in the parking strips at the Lynnwood, WA Costco warehouse store are being subjected to the now epidemic close "maintenance shearing" (PlantAmnesty) one sees everywhere these days and do not seem to be badly affected at all. Maybe the plant has an adaptation to tip damage stemming (so to speak) from its outer coastal habitat.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Shrubs Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.