Return to the Gardening with Stone Forum
| Post a Follow-Up
Building Walkway with Pre-Cast Molds
| | |
Posted by netshound (My Page) on Thu, Jun 22, 06 at 19:33
| Has anyone here ever done a walkway using those Pre-Cast Cement Molds you can buy? Are they as easy as it looks on TV? If so, which do you prefer, the cobblestone look or the brick look. |
Follow-Up Postings:
RE: Building Walkway with Pre-Cast Molds
| | |
| I have done this, the hardest part was mixing all the cement (I used 'Masons Mix' from Home Depot). I mixed in a tub and it was a serious amount of work. Mixing in the 'roll around' buckets is not much easier. If you have a small cement mixer available it would be much much easier. Charles |
RE: Building Walkway with Pre-Cast Molds
| | |
| I'd also recommend using a mixing blade that fits on your power drill. Be sure to use a powered drill though, not a cordless. Use a 5 gallon bucket, and be sure to add the water first, then add the dry mix to the water. I was hoping more people had posted their experience with these molds. I was thinking of trying them too. |
|
|
|
|
