|
Mon, Sep 5, 05 at 11:11
| I spilled some Aussie Timber Oil-Natural on a few of our concrete pavers.....Short of removing and replacing, is there an effective solvent that I can use to clean them up with w/o damaging the surface ? Thanks |
Follow-Up Postings:
|
| I would try lye, aka caustic soda. But I would test it first to make sure it doesn't cause discoloration before going all out. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Gardening with Stone Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.