Return to the Greenhouses & Garden Structures Forum
| Post a Follow-Up
What s the better R value?
| | |
Posted by brandond 6 (hdavis34@hotmail.com) on Thu, Feb 4, 10 at 10:37
| I have a couple options in terms of insulation. Im needing it underneath the plywood on the roof of my greenhouse. The very top of the roof is shingles on the outside and plywood underneath. I do have glazing in all the other places. So my quetion is what would be better reflectix foil insulation, or foam insulation board. |
Follow-Up Postings:
RE: What s the better R value?
| | |
I would use foam board- the reflective foil stuff does not last. A foil-faced foam board is available. Celotex is one brand.
I think your bigger problem will be to keep the moisture from condensing on the plywood and rotting it out. Be sure to install a plastic vapor barrier and/or foiltape all joints. Use expanding urethane foam in any spots where this can't be done. |
RE: What s the better R value?
| | |
| I don't have an opinion (first time in 58 years) about which type of insulation to use, but I cannot emphasize enough the importance of leaving an air space and providing ventilation between the insulation envelope and the sheathing. I've designed and built homes since 1978 and that is one of the most important lessons I've learned. Failure to do so will result in destruction of your roof within a few short years! Regards, Mark |
|
|
|
|
