|
Tue, May 12, 09 at 20:32
| I've got my greenhouse plastic held onto an EMT conduit frame using the "labor saver fabric clips" at Growers Supply (http://www.growerssupply.com/farm/supplies/prod1;gs1_greenhouse_film_
and_covering-gs1_greenhouse_films;pgcc6209.html). It's getting pretty warm in there, however, and those things don't want to come off!
Does anyone else use these? Have you had any luck getting them off without trashing the plastic? I need some tips, because the clips are being very stubborn. |
Follow-Up Postings:
|
| If you have a small screwdriver with a very thin blade (not just a standard size screwdriver) you could work the tip gently under one end of the clip and then use the screwdriver as a lever to pry the clip off. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Greenhouses & Garden Structures Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.