Return to the Tips & Techniques Forum | Post a Follow-Up

 o
Stratification, scaring and sanding.

Posted by luisito8m 9 (My Page) on
Fri, May 25, 12 at 14:55

Hello guys,

I've been trying to germinate some seeds for more than 8 months with no results and I need help and assistance at this point.. Here is what I've done:

First try: Seeds on a thermo with warm water for 48 hrs.. 8 months later.. no results.

Second try: Same as before but with nicking.. no results..

Third try: Stratification implemented for 2 months on the freezer.. no results..

Forth try: 2 months on the freezer, 2 weeks room temperature, seed sanded down about 1/4 inch, will be in warm water in the next 48 hrs.. I don't know if it will work..

Am I doing something wrong?? Nothing works.

I am trying to germinate Byrsonima Crassifolia, also known as Nance/Nanche/Crabo. Its a tropical tree, the seed is around 1/2 in. in diameter, very hard and very thick. I opened the one I used on my first try and the shell is impressively dense and so thick, around 4 mm thick all directions. I had to use sand paper with 100 grain to get to the core, while sanding non stop for 10 minutes. The core, compared to the seed, its 1/8 size.

Any help is welcome!
And thanks for reading! :D

Luis


Follow-Up Postings:

 o
RE: Stratification, scaring and sanding.

Searching for ~ " Byrsonima Crassifolia" scarification ~ I found one place that said " ... Byrsonima crassifolia germination was not successful in any of the treatments except for mechanical scarification by cracking which resulted in 40% germination ... ".


 o
RE: Stratification, scaring and sanding.

What is mechanical scarification by cracking?


 o
RE: Stratification, scaring and sanding.

I believe I have been successful at germinating the nance seeds. I think I was just lucky. I have 2 of them. or is it something else? not 100 percent sure. I planted 16 nance seeds and got 2 to germinate. I froze them for about 3 months inside the shell, then I cracked them opened with a hammer. from about 50 nances I only got 16 seeds out because most of them cracked with the hammer even though I was very careful. I hope that helps you... I also have been trying for about a year to get a hold of a byrsonima crassifolia tree.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tips & Techniques Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.